8Startup And Shutdown Interface - Alpha ESS PWG2-50K User Manual

Fig.6-12 Control state interface
Local manual: Set parameters on the monitoring
screen to control machine operation.

6.2.8Startup and shutdown interface

Enter "startup and shutdown" interface to conduct manual startup and shutdown operation in this interface,
as shown in Fig. 6-13.
Fig.6-13 Startup and shutdown interface
Chapter VI Operation Control Display Panel 29
Local auto: It is used with "local strategy". Under
this mode, monitor and maintain the current
parameter setting (unchangeable),
according to the period for "local strategy"—power
configuration.
Remote control: Under this mode, monitor and
maintain the current
parameter setting can be changed by remote control.
Lock: Under this mode, monitor and maintain the
current parameter setting. The parameter setting
cannot be changed by remote control.
In case of no special requirements, please set it as
"local manual" mode.
After parameters are set and startup condition is met,
machine startup and shutdown can be operated via
"Sys ON" and "Sys OFF".
and operate
parameter setting. The