Changing The Security Levels - Simrad AI80 User Manual

Simrad AI80 User Manual
= = = S e c u r i t y = = = = = = = = P 1 c
A u t h o r i s a t i o n
- - - - - - - - - - - - - - - - - - - - - - - - -
L 1 P I N C o d e : * * * * * * * *
L 2 P I N C o d e : * * * * * * * *
N a v . S t a t u s : 0
V o y a g e D a t a : 0
S t a t i c D a t a : 1
= = = = = = = = = = = = = = = = = = = = = = = = =
E n t e r a u t h o r i s a t i o n c o d e
P I N :
= = = = = = = = = = = = = = = = = = = = = = = = =
A B C D E F G H I J K L M N O
P Q R S T U V W X Y Z 1 2 3 4
Note !
62
2. Press when the L1 PIN Code line is highlighted. The
ENTER
keyboard function will be displayed in the lower part of the
Security menu.
3. Enter AIS (default security code), and
4. Now enter the new security code for Level 1,
5. Highlight the L2 PIN Code and repeat the procedure above to
change the security code for Level 2.
6. Record the new codes and keep them in a safe location. If the new
codes are lost, a master code can be obtained from Customer
Support by supplying the MAC address, see page 65.

Changing the security levels

To avoid unauthorised input of data in the menus accessed from the
Main menu, the AI80 system should be set up with security codes and
different access levels.
All entries on the Security page are protected by L2 security code.
This code has to be entered before any parameters can be changed.
Refer item 3 below.
1. Activate the Security menu from the Main menu.
confirme the entry by moving the highlight to
the symbol and pressing the
and confirmed the entry by moving the
highlight to the
button.
ENTER
button.
ENTER
symbol and pressing the
Man_user_AI80_r2