Displaying Submenus; Entering Data - Simrad AI80 User Manual

Simrad AI80 User Manual

Displaying submenus

A highlighted selection in a page or a menu indicates that the selection
may be entered, either for displaying data or for entering parameter
values.
Rotate the knob to move the highlight to the submenu that is to be
ENTER
entered, and press the
Menus where no selections are highlighted are only used for
displaying information.

Entering Data

A submenu that is used for entering data will include a keyboard
function in the lower part of the display as shown on the figure.
Use the rotating knob for moving the highlight to the selected
character, and enter the character by pressing the
arrow buttons on the MKD may be used for jumping up/down a line in
the characters.
The last four keyboard symbols are used as follows:
Confirm that the entry is completed
Note ! If the field where data is to be entered already has a value, the clear
all symbol
Continue entering characters until the entry is completed, and confirm
the complete entry by moving the highlight to the
pressing the
When all data are entered, the
entry. The operator will be requested to accept or reject
BACK
entries/changes.
28
button to display the submenu.
ENTER
= = = = = = = = = = = = = = = = = = = = = = = = =
A B C D E F G H I J K L M N O
P Q R S T U V W X Y Z 1 2 3 4
5 6 7 8 9 0 . , ! \ " @ -
Space
Clear all
Backspace
must be selected before new data may be entered.
button.
ENTER
BACK
= = = S a v e C h a n g e s = = = = = = = =
Y E S
N O
ENTER
567890.,!\"@-
button is pressed to activate the
Man_user_AI80_r2
button. The
symbol and