Simrad AI80 User Manual page 63

= = = W r i t e M s g = = = = = = = P 2 4
U s e C h n :
- - - - - - - - - - - - - - - - - - - - - - - - -
= = = C h o o s e f r o m l i s t = = = =
D e f a u l t
A O n l y
B O n l y
B o t h
= = = W r i t e M s g = = = = = = = P 2 7
U s e C h n : D e f a u l t
- - - - - - - - - - - - - - - - - - - - - - - - -
= = = = = = = = = = = = = = = = = = = = = = = = =
A B C D E F G H I J K L M N O
P Q R S T U V W X Y Z 1 2 3 4
5 6 7 8 9 0 . , ! \ " @ -
4. When the message is completed, the entry is confirmed by
5. Use the rotating knob to highlight the receiver for the message,
All sent messages will be displayed in the Outbox view. Refer page
56.
Writing broadcast messages
Broadcast messages must be safety related, and they will be sent
without any specific destination. Text entry is similar to entering
general or safety related messages.
Man_user_AI80_r2
Appendix A - Operating procedure optional MKD
writing a safety related message. Confirm the selection by
pressing the button.
ENTER
The Write Msg menu (P24) or Write SR Mgs (25) menu will be
displayed.
1 5 1
moving the highlight to the
button.
The display will now show vessel and base station names that
may be selected as receiver for the message.
and confirm with the
2. Select the channel that is to be used
when sending the message, and confirm
with the
ENTER
The display will change to the Write
Msg menu:
A text message may consist of up to
151 characters. As characters are
entered, the
remaining number of characters that
may be entered.
3. Use the rotating knob and the
button to enter characters.
symbol and pressing the
button to send the message.
ENTER
button.
display will show
ENTER
ENTER
53