General
The factory default
settings may all be
changed in the User
setup, accessed
as shown in the
illustration.
Detailed illustrations
for the different
settings are shown on
the following pages.
Refer also to the
Operation flow chart
in the Basic Operation
chapter.
Display damping
The damping factor indicates how fast the display will
respond to changes in wind readings. The setting affects
both the LCD and the pointer.
The higher the damping factor the more stable display
reading on the instrument.
Range: 0 - 3
The illustration below shows how to change the Damping
level from 0 to 2.
MAIN
USER
MODES
SETUP
- DISPLAY
DAMPING
- WIND
SPEED
3 s
ALARM
- RELATIVE
MODE
- WIND SHIFT
- TRUE
SETUP
ALARM
- GEO-
- SPEED
GRAPHIC
UNIT
- LIGHT
BANK
4 Changing the default settings
SELECT
A. 1
MAIN
MODES
- RELATIVE
MODE
- TRUE
SETUP
- GEO-
GRAPHIC
Default: 0
1 s
MODE
+
A.2
SETUP
Changing the default settings | 19
USER
SETUP
- DISPLAY
DAMPING
- WIND
SPEED
3 s
ALARM
MODE
- WIND SHIFT
SETUP
ALARM
- SPEED
UNIT
- LIGHT
BANK
SELECT
3 s