Simrad AI80 User Manual page 3

This manual is intended as a reference guide for operating the Simrad AI80 Automatic
Identification System.
In this manual, references to buttons on the control unit are written in boldface, and in a
different text style (e.g. VIEW button, SHIFT button, ENTER button).
Important text that requires special attention from the reader is emphasized as follows:
Note!
Caution!
WARNING!
FCC part 15 statement
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a marine
and/or commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. The equipment is not inteded
for operation in a residential area. Operation in such an area is likely
to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
Additional information to the user
Changes or modifications not expressly approved by Kongsberg
Seatex AS will void the user's authority to operate the equipment.
Man_user_AI80_r2
About this manual
Used to draw the reader's attention to a comment or some
important information.
Used to warn the reader that a risk of damage to the equipment
exists if care is not exercised.
Used when it is necessary to warn personnel that a
risk of injury or death exists if care is not exercised.
User manual
iii