Entering Static Data Optional Mkd - Simrad AI80 User Manual

Simrad AI80 User Manual
6.2

Entering static data optional MKD

= = = M a i n M e n u = = = = = = = = P 1
4 . S t a t i c D a t a
= = = S t a t i c D a t a = = = = = P 1 4
O w n S h i p
- - - - - - - - - - - - - - - - - - - - - - - - -
N a m e : A N N E B E R I T
C a l l : T A 1 6 4 G H
M M S I : 1 2 4 3 9 5 8 5 6
I M O : 1 0 9 8 5 6 3
K e e l : 1 2
= = = S t a t i c D a t a = = = = = P 1 4
A I S T r a n s c e i v e r
- - - - - - - - - - - - - - - - - - - - - - - - -
L e n g t h A : 3 0
L e n g t h B : 1 0
L e n g t h C : 7
L e n g t h D : 7
64
All vessel data that do not change from one voyage to another should
be entered during installation.
If MMSI number is changed, the unit should be restarted, see chapter
4.3.
1. Press the
The following information should be entered:
1 / 3
Name: Vessel name
Call:
MMSI: The vessel's Maritime Mobile Signal
IMO:
Keel:
▼
Use the arrow-down button to move to next page where horizontal
location for the GPS antenna included in the AI80 system should be
entered. Refer to the Simrad AI80 Installation Manual.
2 / 3
button to activate the Main
MENU
menu, and select Static Data. The Static Data
menu will be displayed.
Vessel's call signal
Identifier number
Vessel's IMO number
Vessel height over keel in metres. Total
height from keel to mast.
C
A
B
D
Man_user_AI80_r2