Simrad AI80 User Manual page 32

Simrad AI80 User Manual
- Region 2 ----------
ChnA: 2087
ChnB: 2088
RxTx: TxA/TxB, RxA/Rx▼
TxPower: LOW
LAT NE: 64°00'00.00N
LON NE: 011°00'00.00E
LAT SW: 00°00'00.00N
LON SW: 000°00'00.00E
BW A: Default
BW B: Default
Zone: 0
Hold [OK] to save
- Add region ---------
ChnA: 0
ChnB: 0
RxTx: TxA/TxB, RxA/Rx▼
TxPower: LOW
LAT NE: 00°00'00.00N
LON NE: 000°00'00.00E
LAT SW: 00°00'00.00N
LON SW: 000°00'00.00E
BW A: Default
BW B: Default
Zone: 0
Hold [OK] to save
- Default Values ----
ChnA: 0
ChnB: 0
TxPower: HIGH
BW A: Default
BW B: Default
Hold [OK] to save
22
Region
In this page the selected region is displayed. This
page is read only and shows each region's
parameters.
Add region
In this page the user can add a region manually.
Refer chapter 3.6.
Edit Current region
In this page the user can edit current region settings.
Select parameter with
▼
editing and
OK
changes to region. If the user presses
informed that cancelling will delete his entered region.
If the region entered is not a valid region, the user is
notified about this through a dialogue box.
, press
UP/DOWN
when finished. Hold
OK
to start
EDIT
button to save
, he is
CANCEL
Man_user_AI80_r2