Table of Contents
Advertisement
45
The monitoring system is sketched in figure 31.
6.1 AEG WiFi200 (AEG WiFi Stick) communication module
6.1.1 AEG WiFi Stick product overview
The AEG WiFi200 communication module (hereinafter referred to as "AEG WiFi Stick") is a device enabling the
transmission of relevant performance data from your AEG inverter to the monitoring software (AEG InverterControl App
and AEG InverterControl Monitoring Webportal). It allows users to configure inverter parameters, and control and
monitor the inverter locally and remotely. The WiFi Stick fits the RS485 port of the AEG inverters.
WiFi is the standard communication mode for the AEG AS-IC01 and AS-IC01-2. The AEG WiFi Stick features one RS485
and one WiFi communication port for the data transmission. The AEG WiFi Stick features a general serial port which
meets the network standards and has built-in TCP/IP protocol stack for the transformation between the user serial port
and WiFi port.
Below is an overview of the AEG WiFi Stick features:
Interface
RS485
interface
PD201809 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.2-18 EN
Figure 17A: Inverter monitoring system
Parameters function
1.
Automatic control of data flow, automatic identification and transmission
direction of control data and no handshake signal is needed
2.
Transmission speed 300~115200 Baud
3.
Up to 32 devices of RS485
4.
the maximum transmission distance 1200m
5.
Flow indicator
6.
Half duplex mode
45
Advertisement
Table of Contents
