Statistics; Parameter Settings - AEG AS-IC01 Installation Instructions Manual

34
the date when faults occurred and were settled. If the third line is highlighted in color, it means that fault is still
occurring. If not,it means that the fault is solved.

5.4.3 Statistics

Press " " and " " in the main interface to select "Statistics", and then press "ENT" to view the parameters shown in
figure 16F.
The below information can be viewed from the Statistics menu:
Statistics menu:
Content
Lifetime
Day statistics

5.4.4 Parameter settings

Press " " and " " in the main interface to select "Setup Menu", and then press "ENT" to view the parameters shown in
figure 16G.
PD201809 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.2-18 EN
Figure 16F: Statistic information
Total operation time, total power produced, total power saved, total CO
Total power produced, total power saved, peak power and total CO
current day
Table 16: Statistical menu
S e t u p M e n u
A d d r e s s
C a s h / p r i c e
D a t e / T i m e
L a n g u a g e
Figure 16G: Statistic information
Detail
reduction
2
34
reduction in
2