AEG AS-IC01 Installation Instructions Manual page 37

36
Parameters setting
Setting item
RS485 Address
User password
Setup Cash
PD201809 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.2-18 EN
LCD display
R S 4 8 5 A d d r e s s
0 0 1 1
U s e r P a s s w o r d
0 0 0 0 0
S e t u p C a s h
T y p e : E U R E U R
V a l / k W h : 0 0 . 5 0 € / 1 k W h
Instruction
Access the interface and edit the data through " " or " ".
Then press "ENT" again to edit the next digit. After editing
the three digits, press "ENT" to save and press "ESC" to exit.
Access the interface and edit the data through " " or " ".
Then press "ENT" again to edit the next digits. After editing
the four digits, press "ENT" to save and press "ESC" to exit.
The default password is "0000"; the user can enter the
setting interface without password. If the password has
already been set, the user can only access the interface by
providing the correct password.
Access the interface and edit the currency type and cash
through " " or " ". Then press "ENT" again to edit the
next line. After editing the four digits, press "ENT" to save
the changes and press "ESC" to exit.
The currency types include EUR, USD and CNY.
36