Ac Connection Of Three-Phase Inverters 4 Kw To 10 Kw - AEG AS-IC01 Installation Instructions Manual

24
3. Connect the DC connector to the inverter and ensure it is tightly fastened.
4. If you need to remove the DC connector from the inverter, use appropriate tools.

3.4.2 AC connection of three-phase inverters 4 kW to 10 kW

Port instructions of AC connectors for AS-IC01 and AS-IC01-2, 4 to 10 kW:
PD201809 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.2-18 EN
Figure 13B: DC input voltage measuring
Only DC connectors developed for AEG inverters should be used to connect the PV string
to the inverters. No other device should be used, otherwise damages to the product,
unstable operation conditions or fire may occur. Solar Solutions GmbH will not undertake
quality assurance or assume any direct or joint liability thereof.
AC Connector
1
2
3
N
Table 13 Port instructions of AC connectors for AS-IC01 and AS-IC01-2, 4 kW to 10 kW
Three-phase
L1 (A)
L2 (B)
L3 (C)
N neutral wire
PE grounding wire Must be connected
Remark
24