Table of Contents
Advertisement
40
6.2 Optional communication
Optional communication modes include Ethernet, which also needs corresponding communication parts and
components. All operation parameters of the inverter will be transferred through RS485 port, and then to the
communication devices. These allow the transfer of the monitoring data to the monitoring system (Web Portal / App).
If you need further information on optional communication possibilities, please contact the AEG technical service.
6.3 AEG WiFi200 module
6.3.1 AEG WiFi200 product overview
WiFi is the standard communication mode for the AEG AS-IC01 and AS-IC01-2. AEG WiFi200 communication module
features one RS485 and one WiFi communication port for the data transmission. AEG WiFi200 features a general serial
port which meets the network standards and has built-in TCP/IP protocol stack for the transformation between the user
serial port and WiFi port. The serial device can transfer the inverter monitoring data over Internet without any
configuration modification.
Below an overview of AEG WiFi200 features:
Interface
RS485
interface
WiFi interface
Others
PD201709 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.1-17 EN
Parameters function
1.
Automatic control of data flow, automatic identification and transmission
direction of control data and no handshake signal is needed
2.
Transmission speed 300~115200 Baud
3.
Up to 32 devices of RS485
4.
the maximum transmission distance 1200m
5.
Flow indicator
6.
Half duplex mode
1.
Supports data exchange between RS485 - WiFi interface
2.
Meets the 802.11 b/g/n wireless standard
3.
Wireless network AP/STA
4.
Security mechanism WEP/WPA-PSK/WPA2-PSK/WAPI
5.
Barrier-free transmission distance 100 m
1.
TCP Server, TCP Client, UDP mode and UDP Server mode
2.
Operation interface, target IP address and interface can be set in random
3.
Disconnect automatically after network disconnection, ensures reliable TCP
connection of the whole network
4.
Supports TCP/IP/UDP network protocol stack
5.
IE configuration interface
6.
Operation mode, Transparent data transmission or agreement transfer mode
7.
Input power supply: 5VDC~12V/170mA~300mA ; powered directly by
40
Hide quick links:
Advertisement
Table of Contents
