Before Installing The Ceiling Panel - Sanyo C4272R S/C Installation Instructions Manual

07-115 SSHP_II 5/7/07 3:59 PM
I Ceiling Panel
CAUTION
X

3-6. Before Installing the Ceiling Panel

(1) Remove the air-intake grille and air filter from the
ceiling panel. (Figs. 3-13 and 3-14)
(a) Remove the 2 screws on the latch of the air-
intake grille. (Fig. 3-13)
(b) Press on the 2 latches of the air-intake grille
with your thumbs in the direction of the arrow
to open the grille. (Fig. 3-13)
(c) With the air-intake grille open about 45°,
remove the safety cord (hook on the grille
side). (Fig. 3-14)
(d) Pull the air-intake grille towards you to remove
it from the ceiling panel.
(2) Pull down the two panel catches on the body of
the indoor unit body. (Fig. 3-15)
Ceiling panel
Clamp
Ceiling panel wiring
connector
Page 30
Never touch or attempt to
move the air direction louver
by hand or you may damage
the unit. Instead, use the
remote control unit if you want
to change the direction or air
flow.
Panel catch
Electrical
component box
Electrical
component box
Latch
Safety cord
Unit body
Panel catch
(arrange facing downwards)
(2 locations)
Screws M5 with washer
(supplied)
Air filter
Air-intake grille
Fig. 3-15
30
Screw
Air-intake grille
Ceiling panel
Fig. 3-13
Air filter
45°
Fig. 3-14