Activate Umts/Gprs Profile - Lancom 850 UMTS Manual

LANCOM 3850 UMTS
Chapter 5: Setting up the UMTS profile
The UMTS/GPRS profile settings are to be found in LANconfig in the configu-
ration area 'Interface' on the 'WAN' tab with the UMTS/GPRS profile button.

5.3.2

Activate UMTS/GPRS profile

Operating the LANCOM devices with the UMTS/HSPDA function in varying
locations or with different UMTS/GPRS data cards may well require different
sets of settings. The relevant information for operating data cards is collected
in a UMTS/HSPDA/GPRS profile. The profile can be switched very quickly via
the interface settings for the UMTS interface.
The activation of the UMTS interface and the selection of the profile are to be
found in LANconfig in the configuration area 'Interfaces' on the 'WAN' tab
with the Interface settings button.
52
The name of the network can be read from LANmonitor or, for exam-
ple, by using Telnet under /Status/External-Interface/Net-
work-List. A manual network search can be initiated with the
commands do /Status/External-Interface/Scan-Networks
or so
Setup/Interfaces/UMTS-GPRS-parameters/Scan-
Networks.