Ni Max - Furuno WR-2100 Installation Manual

10. NI MAX

NI MAX is a software to confirm a connection and condition of SPU (PXI) from Display Unit.
1. Click [NI MAX] icon on the desktop to open software.
2. Click [Remote Systems] in the Navigation Windows, then click [NI-PXIe8135-2F19B238] to confirm IP
address, and system state of SPU.
3. Click [Remote Systems] in the Navigation Windows to keep going down to [NI PXIe-1071 "Chassis 1"] to
confirm slot details
.
4. Click [4:PXI-8431/4 "RS-485 SN:....] to COM port numbers. These port numbers must be same as the setting
of PXI serial port numbers in RainMap factory setting.
Click [Restart] if necessary to reboot SPU (PXI)
48
SSE-14-0023_17