Furuno WR-2100 Installation Manual page 41

3) RDR Parameter
Antenna rotation speed (H) [rpm]
Setup a horizontal rotation speed of antenna.
Azimuth offset
Setup an azimuth offset angle from origin of radar.
4) Interference Rejection
Interference rejection 0 - 1
Turn On or OFF an interference rejection function
from other radar.
5) Matched Filter
Matched Filter
Turn "ON" when to use QON and VON.
This is a setting of receiving digital filter.
6) Sector Blank
Sector Blank 1 -2
Turn ON or OFF a setting of transmission prohibited
area. (Setup a rectangular solid angle area of
Azimuth and Elevation)
Azimuth Start angle [deg]
Setup a starting angle point of azimuth direction.
Starting point of azimuth is 0 degree on this unit.
Follow a clockwise direction.
Azimuth End angle [deg]
Setup an ending angle point of azimuth direction.
Elevation Start angle [deg]
Setup a starting elevation angle. Horizontal
direction is 0 degree. Follow a zenithal direction.
Elevation End angle [deg]
Setup an ending angle point of elevation.
35
SSE-14-0023_17