Analog Output Nomenclature; Control Input/Output Nomenclature - ABB Symphony Harmony Series Instruction

I/O and Auxiliary Block Nomenclature
Table 11-2. Analog Output Nomenclature
1 2 3 4 5 6 7
P - H B - A O T
Table 11-3. Control Input/Output Nomenclature
1 2 3 4 5 6 7
P - H B - C I
P - H B - C I
NOTES:
1. Available in nonredundant configuration only. (AO bypass provided by optional manual/auto station (IISAC01).
2. Supports control stations that operate as electric drive/pulse positioner bypass stations. Ribbon cable NKCS04 is required to
connect CIO-110 to CIO-100.
11 - 2
8 9 10 11 12 13 14 15 16 17
- 1 5 0 _ _
0 C
0 C
0 S
0 S
1 0
8 9 10 11 12 13 14 15 16 17
O - 1 0 0 _ _
0 C
0 S
1 0
O - 1 1 0 0 0
_ _ _ Block Nomenclature - Current Out
Module/Base Option
1 _ _ Nonredundant cable/clamp terminal base
2 _ _ Redundant cable/clamp terminal base
1 _ _ Nonredundant screw terminal base
2 _ _ Redundant screw terminal base
0 _ _ I/O module
Reserved for Future Use
0 0 Must be zeros
_ _ _ Block Nomenclature - Control Loop
In/Out
Module/Base Option
1 _ _ Nonredundant cable/clamp terminal base
1 _ _ Nonredundant screw terminal base
0 _ _ I/O module
Reserved for Future Use
0 0 Must be zeros
0 0 0 Electric Drive/Pulse Positioner
2
Termination
1
WBPEEUI240751C0