Harmony I/O System; Intended User - ABB Symphony Harmony Series Instruction

Intended User

WBPEEUI240751C0
Inherent redundancy design: Designed with redundant block
Inherent redundancy design: Inherent redundancy design: Inherent redundancy design:
power inputs (24 VDC), redundant communications, and
optionally redundant I/O modules.
Wide variety of I/O types: Analog (high level, low level, and
Wide variety of I/O types: Wide variety of I/O types: Wide variety of I/O types:
temperature), digital, and control I/O.
Significant reduction of installation costs: I/O assemblies
Significant reduction of installation costs: Significant reduction of installation costs: Significant reduction of installation costs:
combine chassis, cabling, I/O electronics, power conversion,
and termination into one device. Distribution of I/O reduces
cable costs.
Reduction in total operating costs: Simplified user configura-
Reduction in total operating costs: Reduction in total operating costs: Reduction in total operating costs:
tion with no calibration required, no address switches to set,
and downloadable firmware.
Compatibility with existing systems: Works with both the
Compatibility with existing systems: Compatibility with existing systems: Compatibility with existing systems:
Harmony bridge controller and Harmony area controller;
works in combination with Harmony rack I/O and INFI 90
OPEN I/O.
Advanced features: Advanced features: Advanced features: Advanced features:
Downloadable firmware eliminates PROM changes.
•
User-assignable software device labels eliminate the need
•
to manually set hardware addresses.
User-assignable I/O channel labels simplify configuration.
•
The same label can be used to identify an I/O channel and
to define a tag in the system database for easier I/O point
recognition.
Advanced diagnostics of I/O block, I/O channel, and Hnet
•
traffic identifies system problems.
I/O status can be inhibited from contributing to block sta-
•
tus, eliminating nuisance alarms.
Manual override of I/O channel values simplifies system
•
maintenance.
This instruction is intended for technical personnel responsi-
ble for installation, operation, maintenance, and repair of the
Harmony I/O system. System engineers and technicians with
Intended User
1 - 9