General I/O Block Specifications; Specifications - ABB Symphony Harmony Series Instruction

Specifications

Table 1-7. Design Standards
Category
CE Mark directives 73/23/EEC
89/336/EEC
92/31/EEC
90/683/EEC
93/68/EEC
93/465/EEC
Certifications CSA
Factory Mutual (FM)

Specifications

Tables
specifications.
Table 1-8. General I/O Block Specifications
Property
I/O blocks
(Refer to indicated table for
individual block specifications)
Microprocessor
Memory
Redundancy link data rate
Block logic power (BLP)
1 - 16
(continued)
Standard
SUBJECT TO CHANGE WITHOUT NOTICE
1-8 through 1-10
NOTE: Refer to the Harmony I/O data sheets (Table 1-4) for current consump-
tion and heat dissipation specifications.
Block
AIN-120 Table
AIN-200 Table
AIN-220 Table
AIN-300 Table
AOT-150 Table
16-bit processor running at 16 MHz
64 kb SRAM
512 kb flash ROM
1 Mbaud
21.6 VDC minimum
24.0 VDC nominal
28.0 VDC maximum
Description
Low voltage directive
EMC directive
CE marking directives
Certified for use as process control
equipment in an ordinary (nonhazardous)
location
Approved for use in Class I; Division 2;
Groups A, B, C, D; hazardous locations.
are general I/O and auxiliary block
Characteristic/Value
Refer To Block
2-1 CIO-100 Table
2-2 DIO-400 Table
2-3 DOT-100 Table
2-4 DOT-120 Table
2-5
1
Refer To
2-7
2-9
2-10
2-11
WBPEEUI240751C0