How To Use This Instruction - ABB Symphony Harmony Series Instruction

Worksheets

How to Use this Instruction

WBPEEUI240751C0
Worksheets are provided for each I/O block type and are only
intended to aid in the installation process. In some cases, the
information recorded on the worksheets may already be avail-
able or provided in some other form.
When installing a complete Harmony I/O system:
1. Refer to the Block Power and Mounting Hardware Block Power and Mounting Hardware instruc-
Block Power and Mounting Hardware Block Power and Mounting Hardware
tion to install and connect the block mounting hardware and
to connect power.
2. Refer to the Harmony Communication Network (Hnet) Harmony Communication Network (Hnet)
Harmony Communication Network (Hnet) Harmony Communication Network (Hnet)
instruction to install and connect Hnet components for com-
munication.
3. Refer to this instruction when installing, operating, trou-
bleshooting, maintaining, and replacing individual I/O and
auxiliary blocks.
To use this instruction:
1. Read Section 1 for an overview of the Harmony I/O system
and a description of the instruction content.
2. Refer to Section 2
and specifications.
3. Read Section 3 and
and auxiliary blocks.
4. Read Section 5 to install I/O and auxiliary blocks. The sec-
tion contains flowcharts that point to the various procedures
that must be performed to complete installation and
connection.
5. Read Section 6 for controller and function code configura-
tion information.
6. Read Section 7 for I/O block operating details.
7. Refer to Sections 8, 9, and
nance, and replacement information respectively.
8. Refer to Section 11
part nomenclature and part numbers.
for I/O and auxiliary block descriptions
Section 4 to become familiar with I/O
10 for troubleshooting, mainte-
for installation, replacement, and spare
How to Use this Instruction
1 - 11