Table of Contents
Advertisement
Copy ready status
Press the
Sending/
Receiving
Copy
completed
(Master side)
Press the
button.
The copy can be made continuously
and the copy ready status can be
held even if the power supply is
turned off.
To complete the copy function,
press the
and
simultaneously for 1 second or
longer.
[F97] Setting of selection of copy function completed
: When the slave side pressure switch displays [Er13], it indicates a sending and receiving error of the copy function.
Press the
and
the wiring and specifications of the switch and retry the copy function.
: When copy is conducted so that the analog output is used, set the FUNC terminal setting of the master side pressure switch to
Aout, then conduct a copy. The FUNC terminal setting of the slave side pressure switch will be Aout when the copy is complete.
Even though the power supply is turned OFF, the
copy ready status will be retained.
button to start copying.
The master Pressure switch
Main display: Red
Main display: Red
buttons
buttons simultaneously for 1 second or longer to return to measurement mode. Then, check
-57-
The slave Pressure switch
When completed
normally
When error
occurs
(Master side)
Press the
and
buttons
simultaneously for
1 second or longer.
Measurement mode
Main display:
Green
Main display:
Green
Main display: Red
(Slave side)
When
completed
normally.
Press the
button.
No.PS※※-OMU0006-A
Hide quick links:
Advertisement
Table of Contents
