F 0 Units Selection Function - SMC Networks ZSE20B Operation Manual

■[F 0] Units selection function
This setting is only available for models with the units selection function.
The unit that can be displayed is different depending on the pressure range.
(kPa/MPa can still be selected if the product does not have the units selection function.)
<Operation>
Press the or
Display unit selection
Press the or
Press the
●Available display unit and minimum set value
Unit ZSE20BF
MPa 0.001
kPa 0.1
2
kgf/cm 0.001
bar 0.001
psi 0.02
InHg 0.1
mmHg 1
button in function selection mode to display [F 0].
Press the button.
button to select the display unit.
button to set.
[F 0] Units selection function completed
ZSE20B ISE20B
0.001 0.001
0.1 1
0.001 0.01
0.001 0.01
0.01 0.1
0.1 -
1 -
-30-
Move on to display unit selection.
Return to function selection mode.
No.PS※※-OMU0006-A