PACE Pressure Indicators User Manual
6.8
Calibration
The calibration menu provides facilities for programming settings for maintenance as
follows:
Note: A PIN protects the Calibration menu against unauthorised use. Each instrument, on
delivery, contains the factory set PIN (4321). To continue protecting the supervisor set-
up menu, the PIN should be changed as soon as possible.
sensor correction
•
Selects the range for a three-point calibration routine.
screen calibration
•
Selects touch screen calibration routine.
Time & Date
•
Sets instrument clock and date.
Change PIN
•
Changes the Calibration PIN.
a.
b.
c.
Note: Confirmation of the new PIN permanently replaces the old PIN. Record this new PIN and
keep in a safe place. If new PIN is lost it can only be reset by returning the instrument to
a GE service centre. For more information regarding calibration, refer to PACE
Calibration Manual K0450.
6.9
Specification
Refer to the PACE1000 data sheet for details.
Note: The data sheet is contained in the CD shipped with the product.
[EN] English
Enter the existing PIN
Enter the new PIN
Confirm the new PIN
6 - 27
K0470 Revision A