6 Reference and Specification
4.
Enter the Supervisor PIN and press ENTER SUPERVISOR PIN. Use the back arrow in the
top right corner of the screen to delete any incorrect data entries.
Note: The factory set Supervisor PIN is 0268. If the Supervisor PIN has been locally changed,
make sure that the new PIN is kept in a safe place. If the new PIN is lost, it can only be
reset at a GE Service Centre.
5.
Press COMMUNICATIONS STATUS to open the COMMUNICATIONS STATUS screen.
6.
Select ETHERNET to open the ETHERNET PARAMETER screen.
K0470 Revision A
6 - 16
[EN] English