Table of Contents
Advertisement
6 Reference and Specification
Lock Tasks
Individual tasks:
Allows any combination of individual tasks to be disabled.
Note: Restricts operation of the instrument to specific tasks or functions, recommended for
production procedures.
All:
Disables all tasks.
Change PIN
Changes the Supervisor PIN: enter the existing PIN, then the new PIN and confirmation of the
new PIN.
Note: Confirmation of the new PIN permanently replaces the old PIN. Record this new PIN and
keep in a safe place. If new PIN is lost it can only be reset by returning the instrument to
a GE service centre.
User defined units
Permits the user to define a set of units. Following the on-screen prompts special units may
be set by selecting a Pascal multiplier and assigning a five character name.
Instrument alias name
Permits the user to define a 20 character alias name for the instrument. The instrument
returns this name through the communications interfaces.
Language
Operation in any of the languages refer to the SDS. Further languages can be up-loaded.
Restore as shipped settings
Restores instrument settings to factory default.
Note: Does not affect PIN settings.
K0470 Revision A
6 - 26
[EN] English
Advertisement
Table of Contents
