Table of Contents
Advertisement
6 Reference and Specification
Icon
Test program
Timing
Units
Use log history
Vent Yes/No
Zero analogue
output
6.4
Measure Set-up
Pressure zero
During use, the instrument pressure sensor can show small zero shifts caused by time and
temperature changes. Regular "zeroing" increases measuring precision.
Process
Selects display processing features that change the reading, as follows:
%:
Pressure can be displayed reading as a percentage of full-scale or as a percentage
of a specified span.
Filter:
The displayed reading can be filtered by a custom low pass filter or the filter can
be disabled (default disabled). The indicator works at a speed independent of the
filter time constant.
Tare:
A specific tare value can be selected or the current displayed pressure reading can
be "captured" as the tare value. The display shows the selected tare value in the
pressure window.
Peak:
Maximum, minimum and average display of pressure readings.
Task
Selecting Task enables a set of pre-determined functions and software enabled optional
functions.
K0470 Revision A
Function
Icon
Function
Test program copy
Time out
User defined units
Vent
Vent set-up
Zero history
6 - 6
Icon
Function
Test program
delete
Timed zero
Use log
Vent time out
Warning
Zero
[EN] English
Advertisement
Table of Contents
