SanDisk CompactFlash Extreme III Product Manual page 98

CIS Description
Table 6-1
Attribute
Offset
11Ch
11Eh
120h
122h
124h
126h
128h
02/07, Rev. 12.0
Card Information Structure
Data 7 6 5 4
1Eh X
0
4Dh X Mantissa
0 9h = 4.5
1Bh CISTPL_CE
12h
C3h I D Configuration Index
1 1
41h W R P B
0 1 0 0
99h M MS IR
1 0 1
6-14
SanDisk CompactFlash Card OEM Product Manual
3 2 1 0 Content Description
1Eh
Exponent Max. Average Current
over 10 ms is 45 mA
5h = 10
Configuration
Entry Tuple
Link to Next Tuple is 18
Bytes. Also limits size of
this tuple to 20 bytes.
AT Fixed Disk
Secondary I/O
3
Address Configuration
Configuration Index for
this entry is 3. Interface
Byte follows this byte.
Default Configuration
Interface Type I/O Interface(1), Bvd's
and wProt not used;
1
Ready/-Busy active but
Wait not used for
memory cycles.
B: Battery Volt Detects
Used
P: Write Protect Used
R: Ready/-Busy Used
W: Wait Used for
Memory Cycles
IO T P V -Only Power
CC
Descriptors; No Timing;
1 0 1
I/O and IRQ present; No
Memory Space; Misc
Entry Present.
P: Power Info type
T: Timing Info present
IO: I/O Port Info present
IR: Interrupt Info present
MS: Memory Space Info
type
M: Misc Info Byte(s)
present
© 2007 SanDisk Corporation
CIS
Function
+.30 Nominal
Operation
Supply
Voltage
Extension
Byte
Max. Average
Current
Tuple Code
Link to
Next Tuple
TPCE_INDX
TPCE_IF
TPCE_FS