Table of Contents
Advertisement
<< Back to Contents
6.4 CC4
6.4.1 General Description
The CC4 protocol is an extension of ccTalk with additional status and payout
commands to support the note float recycler unit and thus should be used if wanting
to use the NV11 in ccTalk. Please contact support for the necessary protocol
documentation.
6.4.2 Pinout
Pin
Name
1
Vend 1
2
Vend 2
3
Vend 3
4
Vend 4
5
Inhibit 1
6
Inhibit 2
7
Inhibit 3
8
Inhibit 4
9
Busy
10
Escrow
11
USB +
12
USB -
13
USB Vcc
14
Factory Use Only
15
+ Vin
16
0V
Copyright © Innovative Technology Ltd 2018
Type
Description
Output
Serial Data (link to Pin 5)
Output
DA3 Data Logging
Output
Not Used
Output
Not Used
Input
Serial Data (link to Pin 1)
Input
Not Used
Input
Not Used
Input
Not Used
Output
Not Used
Input
Not Used
Data
USB Data +
Data
USB Data -
Power
USB Vcc (+5VDC)
Do not connect
Power
+12/24VDC Supply
Power
0V Supply (GND)
Caution!
+12VDC and 0V (GND) must
always be connected, also when
using USB connections.
Doc: NV9 Range User Manual
Version: 1.0
Page 38 of 63
Advertisement
Table of Contents
