Requirements On Finisher Main Pwb Replacement - Olivetti DF-650 Service Manual

3H3-2.0
13. Enter the maintenance mode.
14. Run maintenance item U019 (Displaying the
ROM version) to check ROM version
upgrading was successful.
15. Exit the maintenance mode.
1-6-2

Requirements on finisher main PWB replacement

NOTE
When replacing the finisher main PWB, be sure to conform DIPSW setting of the replaced PWB to that of the removed
PWB.
1-6-2
Finisher main PWB
Service Manual
DIP switch
Figure 1-6-3
Y104371-8