Remarks On Control Pwb Replacement - Olivetti d-Copia 3003MF Service Manual

1-6-2 Remarks on control PWB replacement

When replacing the control PWB, remove the EEPROM (U17) from the control PWB that has been removed
and then reattach it to the new control PWB.
Detaching of EEPROM
1. The flat screwdriver is inserted between
EEPROM and socket.
2. Detach it little by little right and left and
alternately while noting the
transformation and the damage of the
pin.
Service Manual
U17
EEPROM
Figure 1-6-2
EEPROM
Socket
1-6-2
2MH/2MJ/2MK/2ML
EEPROM
Control PWB
Flat screw driver
Figure 1-6-3
Y113860-1