Making The Connections At The Odu; Completed Odu Connector; Ptp 300/500/600 Series Bridge Pidu Plus Connexion - Motorola PTP 300 Series User Manual

Both ends of the ODU cable are terminated in the same way. The above procedure should be
repeated for the PIDU Plus end of the cable when the cable routing process is complete. This
assumes that the installation uses PTP LPUs. If not, then the PIDU Plus end of the cable does
not require a Gland, but just the RJ45.
NOTE: The PIDU Plus end of the cable does not use a cable gland.
Figure 17 shows a completed ODU to PIDU Plus cable.

7.7.2 Making the Connections at the ODU

Looking at the back of the unit with the cable entry at the bottom, the PTP 300/500/600 Series
Bridge PIDU Plus connection is the only hole that will accept an RJ45
"PIDU +".
Installation
Figure 17 Completed ODU Connector
Figure 18 PTP 300/500/600 Series Bridge
PIDU Plus Connexion
50
(Figure 18) and is labeled