Motorola PTP 300 Series User Manual page 3

The system has been tested for compliance to both US (FCC) and European (ETSI) specifications.
It has been shown to comply with the limits for emitted spurious radiation for a Class B digital
1
device , pursuant to Part 15 of the FCC Rules in the USA and appropriate European ENs. These
limits have been designed to provide reasonable protection against harmful interference. However
the equipment can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to other radio communications. There is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the Outdoor Unit (ODU).
• Increase the separation between the affected equipment and ODU.
• Connect the ODU/PIDU into a power outlet on a circuit different from that to which the
receiver is connected.
• Consult your installer or supplier for help.
Deployment and Operation
The Radio Regulations of various countries' limits constrain the operation of radio products gen-
erally. In particular the local regulator may limit the amount of conducted or radiated transmitter
power and may require registration of the radio link.
The power transmitted by the PTP 300 Series Bridge is controlled by the use of Region-specific
License Keys.
The following examples show how the regulatory limits apply in some specific countries at the
current time. Operators should note that regulations are subject to change.
Contact your supplier/installer to ensure that your product is set for the correct License Key for
your Country/Region and to ensure that you have fulfilled all the local regulatory requirements,
especially if you are intending to use a link with external antennas. Notes below the tables indicate
countries where registration of the link is currently mandatory.
1
Class B Digital Device, A digital device that is marketed for use in a residential environment notwithstanding use
in commercial, business and industrial environments.
3