Blind Hem - AEG 30Z Instruction Manual

Instruction manual for Model AEG 30Z /AEG 35Z

Blind Hem

Secure the bottom of skirts and pants with a blind hem, this stitch will sew without stitches
showed on the right side of the fabric.
Stitch Length Stitch Width
1
2 3
1
Fold the fabric as illustrated with the reverse
side up.
1
First carry out an overcasting stitch as
shown in left picture.
It takes practice to sew blind hem. Always
make a sewing test first.
2
Place the fabric under the foot. Turn the
1
handwheel forwards until the needle swings
fully to the left. It should just pierce the fold
of the fabric. If it does not, adjust the stitch
width accordingly.
Sew slowly, guiding the fabric carefully
along the edge of the guide.
Turn over the fabric.
2
36
Blind hem for stretch fabrics.
Blind hem for firm fabrics.
Please Note:
5mm
1
2 Reverse side
3 Overcasting stitch
1 Needle drop point
1 Reverse side
2
Right side