Changing The Presser Foot - AEG 30Z Instruction Manual

Instruction manual for Model AEG 30Z /AEG 35Z

Changing the presser foot

1
1
2
1
2
Turn the power switch to off ("O") when
carrying out any of the below operations!
Removing the presser foot
Raise the presser foot.
Press the lever and the foot will disengage.
Lever
1
Attaching the presser foot
Lower the presser foot holder until the cut-
out is directly above the pin.
Press the lever.
The presser foot will engage automatically.
Cut-out
1
Pin
2
Removing and attaching the presser foot
holder
Raise the presser foot bar. Align the presser
foot holder with the lower left side of the
presser bar. Hold the presser foot holder,
then tighten the screw using the screwdriver.
Presser foot bar
1
Presser foot holder
2
Attaching the edge/ quilting guide
1
Attach the edge/ quilting guide in the slot
as illustrated. Adjust according to need for
hems, pleats, etc.
Slot
1
Edge/quilting guide
2
2
22
Attention: