Winding The Bobbin - AEG 30Z Instruction Manual

Instruction manual for Model AEG 30Z /AEG 35Z

Winding the bobbin

8. After the bobbin has wound a few
turns stop the machine and cut the
thread near the hole of the bobbin.
Continue filling the bobbin until it is
full. Once the spool is full, it rotates
slowly. Release the pedal or stop the
machine. Push the bobbin winder
spindle to the left.
Note:
Use a bobbin that has been correctly
wound with thread, otherwise the needle
may break or the thread tension will be
incorrect.
9. Cut the thread and then remove the
bobbin.
Note:
When the bobbin winder spindle is placed
on the right, "bobbin winding position", the
machine will not sew and the handwheel
will not turn. To start sewing, push the
bobbin winder spindle to the left "sewing
position".
12