3-Step Zigzag - AEG 30Z Instruction Manual

Instruction manual for Model AEG 30Z /AEG 35Z

3-step zigzag

Stitch Length Stitch Width
0~3
Sewing on lace and elastic, darning,
mending, reinforcing edges.
Set the machine as illustrated.
Place the patch in position. The stitch
length can be shortened to produce very
close stitches.
When mending tears, it is advisable to use
a piece of backing fabric as reinforcement.
The stitch density can be varied by
adjusting the stitch length. First sew over
the center and then overlap on both sides.
Depending on the type of fabric and
damage, sew between 3 and 5 rows.
Sewing elastic
Place the elastic on the fabric.
As you sew, stretch the elastic both ahead
and behind the presser foot as illustrated.
Joining fabric
The elastic stitch can be used to join two
pieces of fabric together and it is very
effective when sewing knitted fabrics. If
nylon thread is used, the stitch will not be
visible.
Place the edges of the two pieces of fabric
together and center them under the presser
foot.
Sew them together using the elastic stitch,
taking care to keep the two fabric edges
close together as illustrated.
33