AEG 30Z Instruction Manual page 4

Instruction manual for Model AEG 30Z /AEG 35Z
7. Cleaning and user maintenance shall not be made by children
without supervision.
8. Always switch off the machine if you carry out preparation for
work (change the needle, feed the yarn through the machine,
change the foot, etc.).
9. Always unplug the machine if you carry out maintenance (oiling,
cleaning).
10. Always unplug the machine if you leave it unattended.
11. Don't use the machine in a humid environment.
12. Do not remove the plug by tugging the power cable: always use
the plug itself.
13. If the LED lamp is damaged or broken it must be replaced by the
manufacturer or its service agent in order to avoid hazards.
14. Never place anything on the pedal.
15. Never use the machine if the air vents are blocked. Keep the air
vents of the machine and the foot controller free from dust, fusel
and leftovers.
16. The machine must only be used with foot controller type KD-1902,
FC-1902 (110-120V) / KD-2902, FC-2902A, FC-2902C, FC-2902D
(220-240V) / 4C-316B (110-125V) / 4C-316C (127V) / 4C-326C
(220V) / 4C-326G (230V) / 4C-336G (240V) / 4C-336G (220-
240V).
17. The power cord of the foot controller can not be replaced. If the
power cord is damaged the foot controller must be disposed.
18. The sound pressure level at normal operation is less than 75dB(A).
19. Do not dispose of electrical appliances as unsorted municipal
waste, use separate collection facilities.
2