Litex UB48WW4L Installation Manual
  1. Manuals
  2. Brands
  3. Litex Manuals
  4. Fan
  5. UB48WW4L
  6. Installation manual

Litex UB48WW4L Installation Manual

Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Installation Guide
For Models:
UB48BC4L
UB48WW4L
4009654
net weight of fan: 13.66 lb (6.2 kg)
READ THESE INSTRUCTIONS
AND SAVE THEM FOR FUTURE USE

Table of Contents:

Wiring. pg. 5
Warranty. pg. 8
PRINTED IN CHINA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UB48WW4L and is the answer not in the manual?

Questions and answers

Related Manuals for Litex UB48WW4L

Summary of Contents for Litex UB48WW4L

  • Page 1: Table Of Contents

    AND SAVE THEM FOR FUTURE USE Installation Guide For Models: Table of Contents: UB48BC4L Safety Tips. pg. 1 UB48WW4L Unpacking Your Fan. pg. 2 Parts Inventory. pg. 2 Installation Preparation. pg. 3 Hanging Bracket Installation. pg. 3 Fan Assembly. pg. 4 Wiring.

  • Page 2: Safety Tips

    SAFETY TIPS. WARNING: To reduce the risk of electrical shock, turn off the electricity to the fan at the main fuse box or circuit panel before you begin the fan installation or before servicing the fan or installing accessories. READ ALL INSTRUCTIONS AND SAFETY INFORMATION CAREFULLY BEFORE INSTALLING YOUR FAN AND SAVE THESE INSTRUCTIONS.

  • Page 3: Unpacking Your Fan

    1. Unpacking Your Fan. Carefully open the packaging. Remove items from Styrofoam inserts. Remove motor housing and place on carpet or Styrofoam to avoid damage to finish. Do not discard fan carton or Styrofoam inserts should this fan need to be returned for repairs.

  • Page 4: Installation Preparation

    3. Installation Preparation. To prevent personal injury and damage, ensure blade edge that the hanging location allows the blades a clearance of 10ft. (3.05m) from the floor and inches 30in. (76cm) from any wall or obstruction. 10 feet (76cm) This fan is suitable for room sizes up to (3.05m) 225 square feet (20.9 square meters).

  • Page 5: Fan Assembly

    5. Fan Assembly. 5. Fan Assembly. wood ceiling With the hanging bracket secured to joist the outlet box and able to support the fan, you are now ready to hang your safety cable loop fan. Loosen canopy set screw and lower canopy to expose hanging ball at top of downrod.

  • Page 6: Wiring

    6. Wiring. WARNING: Turn off circuit breakers to white supply wire current fixture from breaker panel and be sure switch is turned to the OFF position. black supply wire CAUTION: Be sure outlet box is properly grounded and that a ground wire (GREEN or from ceiling Bare) is present.

  • Page 7: Canopy Assembly

    7. Canopy Assembly. Raise canopy to hanging bracket until canopy touches the ceiling. Tighten the canopy set screw to secure canopy. Carefully remove protective paper from canopy downrod. canopy set screw downrod 8. Blade Assembly. Remove protective film from both sides of blade.

  • Page 8: Light Kit Assembly

    9. Light Kit Assembly. Install one 6.5 watt medium base LED bulb (included). IMPORTANT: When replacing bulb, please allow bulb and glass shade to cool before touching. reverse switch Partially loosen 3 thumbscrews at bottom of motor housing and raise glass shade to motor housing.

  • Page 9: Troubleshooting

    Service at 1-800-527-1292 to arrange for return of fan. 1. Check wall switch to fan. Return fan, shipping prepaid, to Litex Industries, Ltd. We will 2. Verify that reverse switch is set completely repair or ship you a replacement fan, and we will pay the in either direction.

This manual is also suitable for:

Ub48bc4l

Table of Contents