MobileHelp Cellular Duo System User Manual page 18

Testing your Cellular Classic System
Please test your system on a weekly basis using the TEST button.
In order to test your system on battery backup, please unplug the power from the AC outlet.
■ ■
You can use the TEST button on your Cellular Base Station to conduct a test without speaking
■ ■
to an Emergency Response Operator by following these steps:
- Press and hold the TEST button on Base Station until it illuminates green.
- You will hear an announcement over the Base Station that will instruct you to press the
Emergency Button or Pendant.
- Press the Neck Pendant or Wrist Button.
- The Base Station will announce "test call sent to Emergency Response Center."
- If your test was successful, you will hear "thank you for testing your device" from the
Base Station speaker.
- If your test was not successful, the Base Station will announce "user auto-test failed."
Please contact Technical Support.
If you unplugged your Base Station for the test, once you have finished testing,
■ ■
please remember to plug the power back into the AC outlet.
18
CBS4.0_Complete_UserGuide_MHP8003-179E_12mech.indd 18
MobileHelp Customer Service 1-877-827-6207
MHP8003-179E
8/16/2018 11:14:13 AM