Setting The Av2 Connection; Switching Between The Tv And Vcr Modes; Selecting The Cassette Type; Selecting The Recording Speed (Sv-631X/Sv-6315X/Sv-6313X/Sv-530X/ Sv-435X/Sv-431X Only) - Samsung SV-635X Instruction Manual

Setting the AV2 Connection

If you wish to use the AV2 socket for a PAY TV DECODER, you
must change AV2 to the required position.
1
(SV-635X/SV-631X/SV-6315X/SV-6313X) Press MENU on the remote control.
Result:
2
Press the corresponding
INSTALL
SINTONIA AUTOMATICA
INSTALLAZIONE
SINTONIA MANUALE
STANDARD TV :G
3
CANALE VCR OUT :CH36 Press the OK button to select this option.
❿ SELEZIONE AV2 :DEC
Result:
4
Press the corresponding
❿
USCITA: MENU
" ❷
placed in front of the
5 When...
(SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/SV-2315X/SV-2313X)
Another VCR or Satellite
receiver is connected to
the AV2(DECODER/EXT.) socket
INSTALL
SINTONIA AUTOMATICA
SINTONIA MANUALE
The decoder is connected to
CANALE VCR OUT :CH36
the AV2(DECODER/EXT.) socket
❿
SELEZIONE AV2 :DEC
6 On completion, press MENU twice to exit the menu.
❿ USCITA: MENU
" ❷

Switching between the TV and VCR Modes

The TV/VCR button allows you to record one channel with the VCR
while you watch another channel on the TV.
REPEAT
When the VCR indicator is...
On
OK
Off (or the VCR is turned off)
To switch the VCR indicator on and off, simply press the TV/VCR button.
22
The programming menu is displayed.
or ➛, ❿ buttons to select the
,
" ❷!
option.
The INSTALLAZIONE menu is displayed.
or buttons, until the cursor is
" ❷
SELEZIONE AV2 option.
Press ➛ or ❿, until...
EXT is displayed.
is displayed.
DEC
Your television...
The television receives the picture from
the VCR and you can select channels
with the PROG/TRK (" or ❷) / PROG
(" or ❷) buttons on the VCR or the
remote control.
The television receives the picture from
your home aerial or cable television
system as it did before you connected
the VCR.
You can then use the programme (" or
❷) buttons on your television to select
the channels.

Selecting the Cassette Type

If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
" ❷!
FUNZIONI option.
3
Press the OK button to select this option.
4 Press the corresponding or buttons, until the cursor is
" ❷
placed in front of the DURATA NASTRO option.
5 Press the ➛ or ❿ buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E 300 E260
6 Press MENU twice to exit the menu.
Selecting the Recording Speed
SV-6315X/SV-6313X/SV-530X/SV-435X/SV-431X Only)
You can record a cassette at two different speeds:
SP (Standard Play)
LP (Long Play)
In Long Play modes:
Each cassette lasts twice as long
The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode SP is displayed.
In long play mode LP is displayed.
(SV-635X/SV-631X/SV-6315X/SV-6313X)
OPTIONS
MENU :SI
❿ DURATA NASTRO :E180
NORMA COLORE :AUTO
IPC :SI
16:9 :AUTO
NICAM :SI
❿
USCITA: MENU
" ❷
(SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/SV-2315X/SV-2313X)
OPTIONS
MENU :SI
❿ DURATA NASTRO :E180
NORMA COLORE :AUTO
IPC :SI
16:9 :AUTO
❿ USCITA: MENU
" ❷
(SV-635X/SV-631X/
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
OK
23
GB