Selecting The Recording Speed - Samsung SV-647X Instruction Manual

Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1
Press MENU on the remote control.
OPTIONS
PROG OPTIONS INSTALL
Result:
CLOCK BONUS LANG
2
Press the corresponding
USER SET
USER SET
➛❿!! 3
OK END: MENU Press the OK button to select this option.
" ❷!!
4 Press the corresponding
SELECT
OPTIONS
5 Press the ➛ or ❿ buttons as many times as required, until the
OSD :ON
correct cassette length is displayed.
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
FORMAT 16:9 :AUTO
NICAM :ON
ECO. MODE :OFF
IPC :ON
6 Press MENU twice to exit the menu.
❿ END: MENU
" ❷

Selecting the Recording Speed

You can record a cassette at two different speeds:
SP (Standard Play)
Type Recording Time (in SP)
LP (Long Play)
E-180 180 mins. or 3 hours
In Long Play modes:
E-240 240 mins. or 4 hours
Each cassette lasts twice as long
E-260 260 mins. or
4 hours and 20 mins. The recording is of a slightly lower quality
E-300 300 mins. or 5 hours
To record a cassette...
In standard play mode
In long play mode
SPEED DUB TV/VCR TIMER
22
The programming menu is displayed.
or ➛, ❿ buttons to select the
,
" ❷!
option.
or buttons, until the TAPE
" ❷
option is selected.
E180 E240
E 300 E260
Press the SPEED button on the
remote control, until...
SP is displayed.
LP is displayed.
NICAM
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 33.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
" ❷!
USER SET option.
3
Press the OK button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding or buttons, until the
" ❷
is selected.
5 Press ➛ or ❿, until...
To...
Mono mode OFF is displayed.
: Only set at this position to record the
OFF
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode ON is displayed.
ON : Normally set at this position.
6 On completion, press MENU twice to exit the menu.
OPTIONS
PROG OPTIONS INSTALL
CLOCK BONUS LANG
USER SET
➛❿!!
OK END: MENU
" ❷!!
NICAM option
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
FORMAT 16:9 :AUTO
NICAM :ON
ECO. MODE :OFF
IPC :ON
❿ END: MENU
" ❷
23
GB