Overview Of The Most Important Functions And Units; Menu Languages - Siemens SITRANS FX330 Operating Instructions Manual

SITRANS FX330

6.3 Overview of the most important functions and units

INFORMATION!
A complete list of all functions and short descriptions is provided in the next section. All default
parameters and settings are adapted for the customer.
Menu structure
• "A Quick Setup": Quick check and setup of the signal converter, including application
assistants
• "B Test": Simulation functions and display of the actual measurement values for all variables
• "C Setup": Complete setup possibilities
Frequently used functions
Menu
A1 Language or C5.1 Language
B1.2 Current Output
B1.3.1 Pulse Output
B1.3.2 Frequency Output
B1.3.3 Status/Limit Output
C1.8 Time Constant
C2.1.2 0% Range
C2.1.3 100% Range
Table 6-3: Most important functions

6.4 Menu languages

Language selection
English
In preparation: In preparation:
In preparation: In preparation:
Italian
Russian
Hungarian
Moldavian
Estonian
Table 6-4: Menu languages
05/2016 - A5E36751269-AA
Explanation
Select the menu language (for details refer to following chapter)
Check the current output
Check the pulse output
Check the frequency output
Check the status output
Time constant, damping value
Minimum flow rate (current output)
The set value represents the 4 mA value of the current output.
Usually 0% of flow is set as 4 mA, but it is also possible to assign
higher flow values to 4 mA.
Maximum flow rate (current output)
The set value represents the 20 mA value of the current output.
Usually 100% of flow is set as 20 mA, but it is also possible to
assign lower flow values to 20 mA.
German French
Portuguese Dutch
Norwegian Finnish
Slovak Albanian
Danish Polish
Latvian Turkish
www.siemens.com/flow
OPERATION
Spanish Swedish
Slovenian Czech
Bulgarian Romanian
Lithuanian Chinese
6
55