Siemens SITRANS FX330 Operating Instructions Manual page 72

OPERATION
6
Function
.15 1. Meas. Page
.16 2. Meas. Page
A11.5 Application Assistant - Gas
Function
.1
.2 Units
.2.1 Volume Flow
.2.2 Norm. Vol. Flow
.2.3 Mass Flow
.2.4 Volume
.2.5 Norm. Volume
.2.6 Mass
.2.7 Temperature
.2.8 Pressure
.2.9 Density
.3 Process
.3.1 Fluid
.3.2 Medium
.3.3 Time Constant
.3.4 Low Flow Cutoff
.4 Current Input
.5.1 Temp. Source1
.5.2 Temp. Source2
.6 Gas Mixture
.7 Gas
.7.1 Relative Humidity
.8 Operating Values
.9 Normal Values
.9.1 Norm. Temperature
.9.2 Norm. Pressure
.9.3 Norm. Density
.10 Current Output
.11 Binary Output
.12 Pulse Output
.13 Frequency Output
.14 Status Output
.15 Limit Switch
.16 Flow Totalizer
72
Setting / Description
Same options as in A11.1.13.
Same options as in A11.1.14.
Setting / Description
Same options as in A11.1.2.
Select unit (default: according to order specification or m
Select unit (default: according to order specification or Nm
Select unit (default: according to order specification or kg/h).
Select unit (default: according to order specification or m
Select unit (default: according to order specification or Nm
Select unit (default: according to order specification or kg).
Select unit (default: according to order specification or °C).
Select unit (default: according to order specification or bar).
Select unit (default: according to order specification or kg/m
Select: "Gas", "Wet Gas" or "Gas Mixture".
If fluid is "Gas" or "Wet Gas" (for details refer to
page 56).
0...100 s
Enter low flow cutoff point in current volume flow unit.
Same options as in A11.3.4.
Internal / External / External HART / Not Available
Internal / External / External HART / Not Available
Temperature source 1 and 2 must be different.
If fluid = "Gas Mixture", enter gas mixture in %.
If fluid = "Wet Gas", enter 0...100%.
Same options as in A11.1.4.
Default settings according to order specification or DIN.
Confirm default setting or define in selected temperature unit.
Confirm default setting or define in selected pressure unit.
Confirm default setting or define in selected density unit.
Same options as in A11.1.5.
Same options as in A11.1.6.
Same options as in A11.1.7.
Same options as in A11.1.8.
Same options as in A11.1.9.
Same options as in A11.1.10.
Same options as in A11.1.11.
www.siemens.com/flow
SITRANS FX330
3
/h).
3
/h).
3
).
3
).
3
).
Gas options for gas measurement
05/2016 - A5E36751269-AA
on