Table of Contents
Advertisement
CARE AND CLEANING
Care & Cleaning
What?
Everyday soiling on
glass (fingerprints,
marks, stains left by
food or non-sugary
spillovers on the
glass)
Boilovers, melts, and
hot sugary spills on the
glass
Spillovers on the
touch controls
How?
1.
Switch the power to
the cooktop off.
2.
Apply a cooktop cleaner while
the glass is still warm (but not
hot!)
3.
Rinse and wipe dry with a
clean cloth or paper towel.
4.
Switch the power to the
cooktop back on.
Remove these immediately with a
fish slice, palette knife or razor blade
scraper suitable for Induction glass
cooktops, but beware of hot cooking
zone surfaces:
1.
Switch the power to thecooktop
off at the wall.
2.
Hold the blade or utensil at a
30° angle and scrape the
soiling or spill to a cool area of
the cooktop.
3.
Clean the soiling or spill up with
a dish cloth or paper towel.
4.
Follow steps 2 to 4 for
'Everyday soiling on glass'
above.
1.
Switch the power to the
cooktop off.
2.
Soak up the spill
3.
Wipe the touch control area
with a clean damp sponge or
cloth.
4.
Wipe the area completely dry
with a paper towel.
5.
Switch the power to the
cooktop back on.
11
Important!
•
When the power to the cooktop is
switched off, there will be no 'hot
surface' indication but the cooking zone
may still be hot! Take extreme care.
•
Heavy-duty scourers, some nylon
scourers and harsh/abrasive cleaning
agents may scratch the glass. Always
read the label to check if your cleaner or
scourer is suitable.
•
Never leave cleaning residue on the
cooktop: the glass may become
stained.
•
Remove stains left by melts and
sugary food or spillovers as soon as
possible. If left to cool on the glass,
they may be difficult to remove or
even permanently damage the
glass surface.
•
Cut hazard: when the safety cover
is retracted, the blade in a scraper is
razor-sharp. Use with extreme care
and always store safely and out of
reach of children.
•
The cooktop may beep and turn
itself off, and the touch controls
may not function while there is
liquid on them. Make sure you
wipe the touch control area dry
before turning the cooktop back
on.
13
Advertisement
Table of Contents
