Failure Display & Inspection - Kogan KAINDTNCTPA Instruction Manual / Installation Manual

60cm induction cooktop
Table of Contents

Advertisement

Failure Display & Inspection
FAILURE DISPLAY AND INSPECTION
If an abnormality arises, the induction hob will cut out automatically and display corresponding error codes:
If an abnormality comes up, the induction hob will enter the protective state automatically and display
corresponding protective codes:
Problem
E4/E5
E7/E8
E2/E3
E6/E9
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the induction hob.
Technical Specifications
TECHNICAL SPECIFICATION
Cooking Zones
4 Zones
Cooking Hob
Supply Voltage
220-240V~ 50/60Hz
Cooking Zones
Electric Power
7200W (installed)
Product Size
590 x 520 x 64 (L x W x Hmm)
Supply Voltage
Built-in Dimensions 560 x 490 (A x Bmm)
Installed Electric Power
Product Size L×W×H(mm)
Note: Weight and Dimensions are approximate. Because we continually strive to improve our products we may
change specifications and designs without prior notice.
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to improve our products we may
change specifications and designs without prior notice.
INSTALLATION
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5cm space shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant work surface
material to avoid larger deformation caused by the heat radiation from the hotplate. As shown below:
Possible causes
Temperature sensor failure
Temperature sensor of the IGBT
failure.
Abnormal supply voltage
Bad induction hob heat
radiation
13
What to do
Please contact the supplier.
Please contact the supplier.
Please inspect whether power supply
is normal.
Power on after the power supply is
normal.
Please restart after the
induction hob cools down.
IP64-72N02T
4Zones
220-240V~ 50/60Hz
7200W
590×520×64
560×490
15

Advertisement

Table of Contents
loading

Table of Contents