Table of Contents
Advertisement
Using Your Induction Cooktop Continued
Locking the Controls
• You can lock the controls to prevent unintended
use (for example children accidentally turning the
cooking zones on).
• When the controls are locked, all the controls except
the ON/OFF control are disabled.
To lock the controls
Touch the keylock control. The timer indicator will show
"Lo" To unlock the controls
1. Make sure the Induction hob is turned on.
2. Touch and hold the keylock control for 3-5 seconds
3. You can now start using your Induction hob.
When the hob is in the lock mode,all the controls are
disabled except the ON/OFF, you can always turn
the induction hob off with the ON/OFF control in an
emergency, but you shall unlock the hob first in the next
operation.
Over-Temperature Protection
A temperature sensor equipped can monitor the
temperature inside the Induction hob. When an
excessive temperature is monitored, the Induction hob
will stop operation automatically.
Detection of Small Articles
When an unsuitable size or non-magnetic pan (e.g.
aluminium), or any other small item (e.g. knife, fork, key)
has been left on the hob, the hob will automatically
go into standby in 1 minute.
Auto Shutdown Protection
Auto shut down is a safety protection function for your
induction hob. It will shut down automatically if ever you
forget to turn off your appliance. The default working
times for various power levels are shown in the below
table:
Power level
Default working timer (hour)
When the pot is removed, the induction hob can stop
heating immediately and the hob automatically switch
off after 2 minutes.
Note. People with a heart pace maker should consult
with their doctor before using this unit.
Using the Timer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the
timer will not turn any cooking zone off when the set
time is up.
• You can set it to turn one or more cooking zones off
after the set time is up.
• You can set the timer up to 99 minutes.
1
2
3
4
5
6
7
8
8
8
4
4
4
2
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if you're
not selecting any cooking zone.
2. Touch "+" the controls of the timer. The minder
indicator will start flashing and "10" will show in the
timer display.
3. Set the time by touching the "-" or "+" control of the
timer.
Hint: Touch the "-" or "+" control of the timer once to
decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer to
decrease or increase by 10 minutes.
4. Touching the "-" and "+" together, the timer
is cancelled, and the "00" will show in the minute
display.
5. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
6. Buzzer will sound for 30 seconds and the timer
indicator shows "- -" when the setting time finished.
Setting the timer to turn one or more cooking zones off
If the timer is set on one zone:
1. Touch the"-" or "+" of the corresponding cooking
zone you want to set the timer for.
2. Set the time by touching the "-" or "+" control of the
timer
Hint: Touch the "-" or "+" control of the timer once
will decrease or increase by 1 minute.
Touch and hold the "-" or "+"control of the timer will
decrease or increase by 10 minutes.
3. Touching the "-" and "+" together, the timer is
cancelled, and the "00" will show in the minute
display.
4. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
Note: The red dot next to power level indicator will
illuminate indicating that zone is selected.
5. When cooking timer expires, the corresponding
8
9
cooking zone will be switch off automatically. Other
2
2
cooking zone will keep operating if they are turned
on previously.
If the timer is set on more than one zone:
1. When you set the time for several cooking zones
simultaneously, decimal dots of the relevant cooking
zones are on. The minute display shows the min.
timer. The dot of the corresponding zone flashes.
2. Once the countdown timer expires, the
corresponding zone will switch off. Then it will show
the new min. timer and the dot of corresponding
zone will flash.
9
Advertisement
Table of Contents
