Table of Contents
Advertisement
Using Your Induction Cooktop
THE CONTROL PANEL
SYMBOL
DESCRIPTION
Front left zone controller
Back left zone controller
Back right zone controller
Front right zone controller
Timer controller
To Start Cooking
1. Touch the ON/OFF control .
After power on, the buzzer beeps once, all displays
show "–" or "+", indicating that the induction hob has
entered the state of standby mode.
2. Place a suitable pan on the cooking zone that you
wish to use.
• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. Select a heat setting by touching the "–" or "+"
control.
• If you don't choose a heat setting within 1 minute,
the Induction hob will automatically switch off.
You will need to start again at step 1.
• You can modify the heat setting at any time
during cooking.
If the display flashes
with the heat setting
• You have not placed a pan on the correct cooking
zone; or,
• The pan you're using is not suitable for induction
cooking or; or,
• The pan is too small or not properly centered on the
cooking zone.
No heating takes place unless there is a suitable pan
on the cooking zone.
The display will automatically turn off after 1 minute if
no suitable pan is placed on it.
When you have finished cooking
1a. Turn the cooking zone off by scrolling down to "0" or
touching "-" and "+" control together. Make sure the
display shows "0"
1b. Turn the whole cooktop off by touching the ON/OFF
control.
alternately
SYMBOL
DESCRIPTION
Power/Timer decrease control
Power/Timer increase control
Boost controller
Keylock
ON/OFF control
2. Beware of hot surfaces: H will show which cooking
zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It
can also be used as an energy saving function if you
want to heat further pans, use the hotplate that is still
hot.
Using the Boost function
Activate the boost function
1. Select the heating zone by touching the "–" or "+"
control.
2. Touching the boost control ,the zone indicator show
"P." and the power reach Max.
Cancel the Boost function
1a. Touching the "Boost" control or the "-" button to
cancel the Boost function, then the cooking zone will
revert to its original setting.
OR
1b. Touching "-" and "+" control together. the cooking
zone switch off and the boost function cancel
automatically
• The function can work in any cooking zone.
• The cooking zone returns to 9 automatically after
10 minutes.
• If boost function on the 1st cooking zone is
activated, the 2nd cooking zone is limited to
15 level 9 automatically. Vice versa
• If the boost function of 3rd zone is activated,
the 4th cooking zone is limited under level 9
automatically. Vice versa
8
Advertisement
Table of Contents
