Handling Transducer And Water Temp Sensor; Remote - Hondex HDX-121 Operation Manual

3. HANDLING TRANSDUCER AND WATER TEMP SENSOR

DANGER
Any works on the vessel are very unstable and risky.
Installation/Maintenance of transducer and water temp sensor
should be handled after landing the vessel on ground or fixing
the vessel at shipyard etc.
WARNING
Be sure to ventilate well inside the vessel when installing the
transducer at the bottom of vessel.
Volatile gas from solvent etc causes the toxic symptoms.
Water proof treatment is required for Thru-Hull installation.
If not, it cause the marine accident.
It is not allowed for aluminum vessels due to the risk of
corrosion.
Do NOT operate the electronic tools with wet hands.
It cause electric shock.
Do NOT remove the transducer plug when the power is ON.
It causes electronic shock.

4. REMOTE

DANGER
Do NOT use any leaked AA-batteries. (for IR usage)
It may cause human injuries if a person touches the leaked
liquid.
CAUTION
Place the remote for safe location when not being used.
Prevent from dropping and human accident.
3