SAVE (ERASE) ROUTE
Save (Erase) Route
Route
Max. 40 routes (max.20 passing points)
The created route remains until it's erased.
CLR key
NUMBER
key
1
Go to 4.ROUTE – 4.ENTER ROUTE.
SET key
CENTER
key
NUMBER
key
2
Enter route number press SET key.
Red-colored route number is already
registered. Use other number (white) or
erase unnecessary number first.
3
Use DIRECTION key to move the cursor
to the passing points. " " mark is created
for each passing point, and all the marks
are connected with a line.
4
Press CLR key to end the route save.
54